Bioremediation of acid mine drainage and crude contaminated soils

Abstract

Pollution is one of the greatest ills plaguing the existence of the ecosystem which could lead to the annihilation of terrestrial and aquatic habitat if not remedied. Acid mine drainage (AMD) and crude oil are among the major land and water pollutants cause by industrial and human activities. The constant exploration, mining, and processing of mineral resources and prevalent use of petroleum products for economic purposes have contributed to contamination of soil and proximate water bodies which results in environmental degradation; thus, remediation becomes necessary. The treatment of AMD contaminated soils using the conventional methods has some room for improvement to meet the remediation purpose. Bioremediation technology provides a sustainable and eco-friendly approach to the treatment of contaminants. This study aims to evaluate the performance of different potential bioremediation techniques and conduct a comparative analysis of these methods for the treatment of AMD and crude oil-contaminated soils. The treatment approach for both pollutants comprises of soils separately contaminated with AMD and crude oil before the application of bioremediation techniques. For the biostimulation study, contaminated soils were amended with varying ratios of the brewery or municipal wastewaters (BWW and MWW), while the bioventing (BVT) treatment involved wastewater amendment and supply of atmospheric air from the vadose zone at 3L/min at 30 minutes intervals every 48 hours. The bacteria strain Pseudomonas aeruginosa ATCC 15442 used for the study which was inoculated at 5%(w/w) was cultured in two different media for respective treatments and wastewater was amended as an extra energy source for bioaugmentation (BAU) study while Bioattenuation (BAT) which received no amendment was used as a control treatment for the study. The treatments were conducted in plastic bioreactors under mesophilic conditions for 28 days and samples were collected from each treatment system on weekly basis to analyse for sulfate, heavy metals, and total petroleum hydrocarbon (TPH) reduction. The result of the study showed that the amendment of contaminated soils with wastewater increased alkalinity in the system which enhanced microbial activities for effective remediation which recorded 52.43 and 51.23% average TPH and metal removal efficiency for the BSTc treatment. Also, the combined application of bioremediation techniques was more effective than single application as the introduction of oxygen into the treatment system with wastewater amendment increased the TPH and metal removal efficiency by an average of 12.98 and 13.17% respectively but efforts to enhance sulfate removal by air-injection (BVTa) proved abortive with 17.20 and 14.67% removal efficiencies less than BSTa and BAUa respectively as sulfate-reducing bacteria thrive in an anaerobic environment. However, P. aeruginosa ATCC 15442 adopts the sorption process in the reduction of hydrocarbon and metal toxicity with 42.02 and 41.81% average removal efficiencies respectively and the amendment extra nutrient (wastewater) increased the removal efficiency of these pollutants by 25.24 and 16.23% respectively. The results of the study inferred that wastewater (BWW and MWW), air-injection and P. aeruginosa ATCC 15442 showed great potentials in the degradation and removal of TPH, metals and sulfate contaminants, hence, can serve as a viable strategy for the remediation of AMD and crude oil polluted soils while improving waste management and amelioration of pollution aftermath faced by communities involved in mining and oil production and/or processing. There is a need for optimization to ensure effective remediation while further study is required to validate large scale application.