Please use this identifier to cite or link to this item: https://hdl.handle.net/10321/4699
Title: Synthesis of lactic acid using hydrogen cyanide extracted from cassava (Manihot esculenta) leaves
Authors: Ilunga, Monga 
Keywords: Racemic lactic acid;Cassava;Manihot esculenta
Issue Date: May-2022
Abstract: 
Racemic lactic acid (2-hydroxypropanoic acid) has gained interest in the food and non-food
industries and in producing biodegradable and biocompatible lactic acid polymers. Although
racemic lactic acid is conveniently synthesised by chemical synthesis via the DL-lactonitrile
route, it can also be produced by the fermentation process provided that suitable microorganisms and substrates are used. However, regardless of the sustainability issues associated
with the fermentation process, it is the preferred production method since the chemical process
relies on fossil fuel resources. In this context, this study aims to extract hydrogen cyanide
(HCN) from cassava (Manihot esculenta Crantz) leaves and then use it to chemically produce
racemic lactic acid.
Cassava leaves were chosen as a natural source of HCN since they release 20 times more HCN
than the tubers. HCN is produced by endogenous enzymes (linamarase and hydroxynitrile
lyase) hydrolysing the cyanogenic glucosides (linamarin and lotaustralin). Following 120
minutes of maceration at 30 °C, the released HCN was extracted for 45 minutes under vacuum
at 35 °C – 45 °C and collected in 400 mL of 5.104 mol/L sodium hydroxide (NaOH) solution
(absorbing solution) to give sodium cyanide (NaCN) solution. The extraction process was
repeated until saturation of the absorbing solution was achieved. The final concentration of
NaCN solution determined by the alkaline picrate method was found to be 4.0421 mol/L.
Furthermore, the sodium carbonate (Na2CO3) and residual NaOH content in control and sample
sodium cyanide solutions were also determined. The Na2CO3 content was 0.72 % in the control
NaCN solution and 2.49 % in the sample NaCN solution. The residual sodium hydroxide
content was 2.61 % in the control sodium cyanide solution and 4.20 % in the prepared sodium
cyanide solution.
79.241 g of NaCN crystals (0.19 % yield, green NaCN) were obtained from 42.750 kg of fresh
cassava leaves. The suggested approach was successful in preparing NaCN, as evidenced by
X-Ray Diffraction (XRD), Attenuated Total Reflectance-Fourier Transform Infrared
Spectroscopy (ATR-FTIR), and Scanning Electron Microscopy with Energy Dispersive X-Ray
Spectroscopy (SEM-EDS) results. Control and green NaCN both contained sodium carbonate
impurities, as shown by these spectral techniques. Titration tests revealed that the latter was
0.61 % and 2.29 % in control and green NaCN, respectively. In addition, titration studies
indicated that the residual NaOH content in control NaCN was 1.63 % and 4.68 % in green NaCN. The high carbonate content can be explained by the reaction between residual sodium
hydroxide and atmospheric CO2. Reproducibility and repeatability tests were done to evaluate
the reliability of the hydrogen cyanide extraction method.
Racemic lactic acid was synthesised using a four-step process. 73 mL of DL-lactonitrile (2-
hydroxypropanenitrile) (81.1 % yield, 59.7 % pure) was prepared by reacting 75 mL of
acetaldehyde with hydrogen cyanide generated in-situ from green sodium cyanide (62.190 g in
150 mL of Milli-Q water) in the presence of 37 % hydrochloric acid (100 mL). 35 mL of crude
racemic lactic acid (84.1 % yield, 14.9 % pure) was prepared by hydrolysing 40 mL of DLlactonitrile with 8 mol/L hydrochloric acid (40 mL). Crude racemic lactic acid underwent a
two-step purification process in the presence of concentrated sulphuric acid (5 mL), used as
the catalyst. 35 mL of crude lactic acid was first esterified with excess methanol (50 mL) to
produce 32 mL of methyl DL-lactate (methyl 2-hydroxypropanoate) (71.6 % yield, 46.1 %
pure). The ester was then hydrolysed with excess water (20 mL) to give 22 mL of purified
racemic lactic acid (88.0 % yield, 56.0 % pure). The identity of the synthesised products was
confirmed by comparing them against control samples using 1H Quantitative Nuclear Magnetic
Resonance (1H QNMR) and ATR-FTIR. Their purity was determined by 1H QNMR, using
dimethylformamide as the internal standard. The overall yield of synthesised racemic lactic
acid was 43.0 %.
Description: 
Submitted in fulfillment of the requirements for the degree of Masters in Chemistry: Applied Science, Durban University of Technology, Durban, 2022.
URI: https://hdl.handle.net/10321/4699
DOI: https://doi.org/10.51415/10321/4699
Appears in Collections:Theses and dissertations (Applied Sciences)

Files in This Item:
File Description SizeFormat
Ilunga M - Final Thesis_Redacted.pdf5.3 MBAdobe PDFView/Open
Show full item record

Page view(s)

243
checked on Nov 23, 2024

Download(s)

394
checked on Nov 23, 2024

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.